Product Catalogue > TrueNet® PLM UTP and S/FTP Category 6 Patch Panel
Communications Room
TrueNet® PLM UTP and S/FTP Category 6 Patch Panel
General Info
The TrueNet® PLM 24 Port Category 6 Patch Panel from ADC KRONE combines our leading connectivity technology with Intelligent Physical Layer Management providing a 'best in class' solution. The panel incorporates a unique LED indication and port labelling system not to be found on any other product on the market.
- Product Description: Booted Patch Cord, PLM Category 6 KM8, LSZH Orange UTP
- Product Number: 5719 2 825-XX
- Application: Communications Room
- Number of U: 1U
- Dimensions: 44mx483mmx120mm
- *Replace XX with: 04 = 1.5m 07 = 2m 10 = 3m 15 = 5m
Features
- Unique LED indicators
- Clear port labelling
- Incorporates the fully component compliant Category 6 KM8 jack
- Fully warranted integrated solution
- Requires special purpose TrueNet® PLM patch cord
- Ease of installation through patented cable management features
- Rapid / fault free adds moves and changes
- Showcase standard communications room appearance
- Covered by the TrueNet® System Warranty
Mechanical Specification
- Conductor diameter 0.5-0.65mm (AWG 24-22)
- Insulation diameter 0.7-1 .4mm
- Plug / jack mating cycles 750 (IEC / EN 60603-7 Series)
- Plug / jack insertion / withdrawal force ≤ 20N (UTP), 30N (STP) (IEC / EN 60603-7 Series)
- Product weight 0.9Kg including jacks (UTP), 2.2kg (S/FTP)
Electrical/Optical Performance
- Jack - Category 6
- Insulation resistance > 500MΩ
- Dielectric strength - Contact / contact 1 .0kV
- Current carrying capacity > 1A / contact
- Typical plug / jack resistance > 20MΩ
- Conductor terminations of LSA-PLUS® contacts > 33
- Panel Signal voltage 5V dc
- Panel Signal current 2 mA max (EN60950:2000)
Environmental Specification
- Operating temperature range -10° to +60°C
- Operating humidity range ≤ 95% relative humidity non condensing
Compliance/Testing
- Panel testing requirements of connection technology according to ISO/IEC 11801 2nd edition ANSI/TIA-568-B.2.1 and EN 50173-1:2002